Zur Navigation springen

HP Compaq NC6134 Gigabit Ethernet NIC 10/100/1000Base-T PCI-X 133 Mhz Card REF

ab 35,95 €
exkl. 19% USt., zzgl. Versand
  • sofort verfügbar
  • ArtikelNr.: 200902242
  • Artikelgewicht: 0,50 kg
  • Versandgewicht: 0,50 kg
Jetzt Kaufen
bitte wählen

Beschreibung

HP Compaq NC6134 Gigabit NIC 64 PCI 1000 SXAdapter 
Modell:
174818-B21
Zustand: refurbished, 12 Monate ip4 Gewährleistung

  • Manufacturer: HP Compaq
  • Part/Assembly Number(s): 010133-001
  • Option/Retail Part Number: 174818-B21
  • Spare Number(s): 102324-001
  • Compatible with Server Models: 1850, 3000, 5500, 6000, 6400, 6500, 7000

    Compaq NC6134 Gigabit 64 PCI 1000 SX NIC

    Standalone, single port, 64-bit PCI Gigabit (1000Base-SX ) Ethernet NIC. It uses fiber-optic SX cable and provides failover capabilities with other Gigabit and 10/100 NICs installed in the workstation or server.

    The Compaq NC6134 is a 1000Mbps server adapter that has been designed, developed, and tested to meet the needs of server customers. The NC6134 model supports the PCI v2.1 standard, provided by Intel's latest Gigabit controller, and it also ships with support for all the major network operating systems. This Gigabit (1000Base-SX ) Ethernet NIC operates in 32-bit or 64-bit PCI slots and uses bus-mastering technology to maximize throughput and minimize CPU utilization. It currently offers the highest data transfer method available between a network and a server for high network performance.
    Adaptive Load Balancing (ALB) and Cisco's Gigabit EtherChannel are two port bonding methods supported by the NC6134. ALB provides both failover and balancing of transmit traffic across all NICs for increased performance. For even higher performance, Cisco's Gigabit EtherChannel (GEC) provides port failover and balancing of transmit and receive traffic across all NICs when connected to a switch that supports GEC.
    Network Fault Tolerance (NFT) support, sometimes called "NIC Redundancy" or "failover," allows the server to always keep an active link. After installing a second, compatible NIC, if the primary network connection fails for any reason, the second, backup NIC will automatically take over-retaining the network connection.
    The PCI Hot Plug feature enables NICs to be replaced or added to a PCI Hot Plug compatible server without having to power off the server. This can reduce NIC maintenance time and allows for system maintenance during regular business hours which will increase system availability and non-stop serviceability. Diagnostic LEDs show link integrity and network activity for easy troubleshooting.
    Product Features
    Feature Specification
    Part numbers Option Part #: 174818-B21

    Spare Part #: 102324-001

    Assembly #:  010133-001
    Bus interface PCI 64-bit or 32-bit, 33-MHz Bus Master DMA
    Compliance IEEE 802.1q and 802.3z 1000 Base-X Ethernet compliant
    Power requirements 1025mA@+5Vdc max
    Certifications FCC Class B, CE Mark compliant
    Data Transfer 1000 Mb/s, Half and full duplex support, Auto negotiating
    Connector One SC duplex connector (SX = 850nm wavelength)
    Buffer memory 48 KB receive data FIFO and 16 KB transmit data FIFO
    Communication processor Intel 82542 chipset
    Supported cabling Multimode 62.5 um - 220 meters, Multimode 50 um - 550 meters
    Standard Features
    • IEEE 802.3z 1000 Base-X Ethernet compliant
    • Half and full duplex operation
    • Auto Negotiation (hardware and software implementations)
    • SC duplex connector (SX = 850nm wavelength)
    • LEDs for activity and link integrity
    • 64-bit Addresses for systems with more than 4GB of Physical Memory
    • 64/32-bit , 33 MHz PCI host interface compliant with PCI 2.1
    • Link level Flow Control (receiving XON/XOFF frames)
    • Programmable host memory receive buffers (256B to 2KB) and cache line size from 16B to 128B
    • 48KB receive data FIFO and 16KB transmit data FIFO
    • Descriptor ring management hardware for transmit and receive (two rings)
    • Command-usage optimization for advanced PCI commands (MWI and memory reads)
    • Expanded flow control support (sending of PAUSE frames) & Receive FIFO thresholds
    • Additional statistics for management and RMON
    • Support for ISL VLANs
    • 802.1q support  
    Operating system support
    • Microsoft Windows 2000
    • Windows NT 4.0
    • Novell NetWare 3x, 4.x and 5x Server
    • IBM OS/2 Warp Server
    • MS-DOS Client for unattended installation
    • NetWare DOS Client for unattended installation
    • SCO OpenServer 5.x
    • SCO UnixWare 7.x
    • SCO UnixWare 2.1
    Operating temperature 0° to 55°C / 32° to 131°F
    Shipping temperature -65° to 85°C / -85° to 185°F
    Operating humidity 5% to 95% (noncondensing)

    Eigenschaften

    • Zustand: Es handelt sich um Gebrauchtware, welche von unserem Technikerteam getestet wurde. Die Ware ist technisch und optisch in einem einwandfreien Zustand, jedoch können teilweise Gebrauchtspuren zu sehen sein, inkl. 12 Monate ip4 Gewährleistung.

    Frage zum Produkt

    Frage zum Produkt
    • (Lösung eingeben)

    Artikel weiterempfehlen

    Artikel weiterempfehlen

    Produkt Tags

    Tag hinzufügen

    Bitte melden Sie sich an, um einen Tag hinzuzufügen.